Cincinnati RPT USA
CNC Super-precision Lathes
CNC Vertical Turning Lathes CNC Sliding Head Automats   CNC Automats
  • 1
  • 2
  • 3
  • 13
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 12
  • 14
  • 15
jQuery Photo Gallery by v4.1
External Inserts
Fully ground edges for cleaner cuts
WhizCut inserts are specially developed to suit the cutting conditions in bar feed automation lathes. The Whizcut inserts are made of micro grain carbide which results in maximum strength when looking at hardness and wear resistance. All cutting edges are fully ground and exceptionally sharp. This, together with the latest types of coating and suitable cutting geometries, gives WhizCut inserts an excellent tool life.

Innovative WhizCut inserts, such as the back-turning inserts, provide less cutting load and thereby higher precision and less interruptions in production. Whizcut has a large variety of standard inserts to cover almost all external cutting applications, and special inserts can easily be produced if the best geometry is not in the standard range.

WhizCut inserts are designed to enable cost-efficient grinding in order to obtain very competitive prices.
External Toolholders
One insert - two clamping systems
WhizCut provides an efficient solution to the problem of limited space when indexing inserts in a modern CNC Swiss Type Automatic lathe. Almost all types of external applications can be performed using two toolholders, one for axial turning and one mainly for radial turning (Parting off etc.) The WhizCut system enables each toolholder to clamp up to 40 different kinds of inserts for various applications.

The WhizFix toolholder system uses a pin and a nut to make it possible to index or change the insert from the opposite side of the toolholder. The inserts can be indexed within 15 seconds even without access to the insert, making it the most effective system on the market today for CNC automatic lathes.

The WhizCut screw type toolholder system, which utilizes the same inserts as the WhizFix system, is used when there is no problem accessing the insert from the insert side of the toolholder.
For more information :
Copyright 2007© Machine Tools Consultants.All rights reserved. Designed by universal advtg.